Hi,
I have already developed an OBD2 scanner cum GPS Tracker device (using STN1110, ESP32, SIMCOM7600). Device is reading all basic PIDs.

I have mobile and web developers working in-house. You can take their full assistance.

From our Web and Mobile Application, device needs to sniff the CAN traffic from ECM/ECU of the vehicle (for all types of vehicles since 2007) and then replicate ECU commands to CONTROL following functionalities (remotely using our installed device through BLE, GPRS & SMS commands):

1- AC/Heater ON/OFF (Controlling)
2- Central Locking Unlock/Lock(Controlling)
3- Windows Up/Down (Controlling)
4- Engine Start/Stop (Controlling)
5- Engine Lock/Unlock (Controlling)
6- Horn On/Off (Controlling)
7- Indicator Left/Right (Detection)
8- Steering Wheel Turning Angle (Detection)
9- Gear Shift Position (Detection)
10- Seat Belt (Detection)
11- Hand/Electronic Brake (Detection)
12- Foot Pedal Brake (Detection)

Reference:

https://www.youtube.com/watch?v=LnDq5oujfK0     (Timeline: 2:15 to 4:35)

https://www.youtube.com/watch?v=LnDq5oujfK0&t=47s
https://www.youtube.com/watch?v=oZ6B1oeEgDg
https://www.youtube.com/watch?v=cAAzXM5vsi0  (Part-1)
https://www.youtube.com/watch?v=ZhYc95b6WoU  (Part-2)
https://www.youtube.com/watch?v=ifjCRsCPfa4  (Part-3)
https://www.youtube.com/watch?v=5G1VdQEV5BA  (Part-4)

https://www.youtube.com/watch?v=Se2KCVyD7CM  (Part-1)
https://www.youtube.com/watch?v=gtVQeTRps7o  (Part-2)
https://www.youtube.com/watch?v=XiqU5wpnupk  (Part-3)

Thank You

Budget: $6,000

Posted On: February 01, 2024 21:27 UTC
Category: Firmware Development
Skills:Arduino Firmware, ESP32, Embedded Application, Embedded System, CAN Bus, Automotive

Country: Pakistan

click to apply